Protective Coatings from Fluid Sealing: Benefits of Using Protective Coatings on Pumps

24 October 2022

Industrial buildings use different types to carry out their primary operations. Some types of pumps that these buildings use are centrifugal pumps, axial flow pumps, piston pumps, gear pumps, and diaphragm pumps.

Centrifugal pumps are used by industrial plants that want to process low-viscosity liquids at high flow rates, while axial flow pumps are used to carry out operations with a very high flow rate with a very low head. Piston pumps are then utilised to process abrasive liquids. Gear pumps can effectively move clean oil, while diaphragm pumps can process different types of liquids.

No matter what their purposes are, the pumps used in industrial plants utilise components that move regularly. And with their daily operations, the amount of wear and tear with these things can be drastic. Fortunately, these pumps can be maintained by applying protective coatings.

A Quick Overview of Protective Coatings

Protective coatings are coating elements that can save pump components against corrosion, external damage, and wear. With the right materials, these coatings can be effective in withstanding moisture, heat, and electrochemical elements. These coatings can also withstand harsh chemicals, acids, and pH in processed elements. Some of these coatings may be made from polyurethane. Others, alternatively, can be created out of silicones and epoxies.

Protect Pumps with Protective Coatings

Pumps, as mentioned earlier, can attain issues and problems as time passes. Hence, industrial plant owners and managers like you should protect them with the right protective coating. One protective coating that can be helpful for pumps is the abrasion-resistant coating. Once this coating is applied to your pumps, you can expect to gain the following benefits.

• Minimised Friction: One of the benefits of applying an abrasion-resistant coating to your pumps is it can minimise the friction on their surfaces. Most components of your pumps are made from metals. Since the interaction between metal components can only damage their surfaces due to excessive friction, it would be best for them to be protected. Abrasion-resistant coatings, fortunately, can minimise the friction between pump components, which can then extend their service life for years.

• Enhanced Protection: Another benefit of adding abrasion-resistant coatings to your pumps is they can protect them from damaging elements. Abrasion-resistant coatings are often made from hydrophobic materials. This quality allows the coatings to prevent the absorption of water, ensuring that the pumps will not get damaged by moisture. Their protection from water can subsequently prolong the service life of pumps.

• Simplified Cleaning: One more benefit of installing abrasion-resistant coatings on your pumps is they can simply their cleaning requirements. The components of pumps must be cleaned and maintained regularly to ensure that they can operate for a long time. But their cleaning process can sometimes be challenging. With the addition of coatings, your pumps are expected to be easier to clean and maintain. This quality can likewise make their overhead expenses to be smaller than before.

To purchase quality coatings for your pumps, you can contact us at Fluid Sealing.

Optimized by: Netwizard SEO